Resize curve for sketching in Nx Siemens | how to modify radius of set of sketch
curve unigraphics
Use the Resize Curve command to modify the radius of a set of sketch curves.
If required, NX adjusts adjacent curves and constraints to make the
change.
Resize single or multiple arcs and circles.
Use Curve Finder to find other curves in the sketch that meet specific
geometric conditions relative to the curves that you selected to resize.
For example, if two curves have the same radius, it is likely that you want to
resize them together. Select a coordinate system or a curve as the symmetry
axis. When the curves are resized, symmetry is retained for the radius and the
position.
Resize the curves while maintaining the arc center location, or maintaining
the adjacent tangent curve positions as a fillet.
In this example, the Resize Curve command is used to modify the radius of two
fillet curves.
The four fillets are initially constrained with equal radii. NX deletes the
required constraints to allow the change.
How resize curve works in Nx Siemens which is mentioned below
video?